Product Review

Crack Premium Repair Kit & Windscreen DIY Chip Windshield Auto Glass Wind Screen
Windshield repair instructions
1, Clean damaged area
2, Mount seal t windshield
3, Remove backing from seal
Peel backing from top side of adhesive seal.
4, Mount pedestal to adhesive seal
Line up pedestal with adhesive seal making sure tabs match up.
Press pedestal to glass.
5, Place resin into pedestal
6, Connect injector to pedestal
7, Lock plunger in vacuum position
Hold injector with one hand,pull plunger upward with the other hand . Lock plunger by engaging lower notch in plunger with spring clip.
Release hands and allow device to remain in locked postion.
8, Fill injector with air
9, Move plunger to pressure
Hold injector with one hand and rotate plunger releasing spring clip from lower notch.
Depress plunger downward engage upper notch with spring clip.
10, Remove pedestal from glass
Loose outer edges of pedestal with a safety razor.
11, Pit Filling procedure
12, Curing & finishing
Run safty razor lightly over clear film to vent out any air bubbles.
Note: Ultra violet sun rays cure the resin. Park vehicle in direct sunlight for 15 minutes.
Note:
1, Avoid using in direct sunlight-work in shaded area.
2, Do not work on a hot windshield, park vehicle in shaded area and open windows to cool glass surface.
3, A safety razor is required to remove components and finsh repair.
Caution:
Do not let resin come in contact with painted surfaces.
Package included:
1X Windshield Repair Injector
1X repair resin
2X Adhesive Seal
1X Pedestal
5X Curing Film
1 x Razor Blade
1 x Instruction Manual
Note:Light shooting an