Product Review

If you are not experienced, please search videos in Youtube with the key word "replace iPhone 5S screen" . Study the video in advance,it will help you to have an easy installation.
Installing Reference
1.Turn off your phone.
It is to avoid electrostatic damage on the screen or on your mobile phone.
2. Get the two bottom screws out.
Only the correct screw driver.Otherwise the screws or the mobile phone could be damaged.
3. Use the suction cup and pry stick to open the phone slowly.
4．Remove the home button cable protective cover then disconnect the home button cable.
5．Remove the 4 screws which fixed electromagnetic shielding metal plate. Please mark down the corresponding place for each screw.
Do remember the correct position of each screws (and any other accessories) or it will caused permanent damage to your mobile phone.You can use the memory pad to help you remember the position.
6．Disconnect 3 cables, now you have the screen and the main board separated.
The ribbon cables are very sensitive. Be careful when handling them.
7. Remove the original home button from your old screen，move to our new screen to keep the touch ID function.
8. Plug the 3 cables in, and a slight click suggests the cables are right in the position. Then Install the electromagnetic shielding metal plate (Note: bottom two screws are shorter than the top).
9. Turn on the phone to test all of the functions are in good condition. If there are some functions not useful, please turn off the phone and reconnect the cable (step 7 to 9).
10. Plug the home button cable in and install the electromagnetic shielding metal plate.
11. Plug the screen in the main board.
12. Install the 2 bottom screws in. And your phone back to life again.