Product Review
Jaybird & Mais 30/31 Adhesive Foam is a foam substrate combined with a natural rubber adhesive on a release paper liner. The product is 100% latex free - both the foam substrate and the adhesive coating does not contain any Dry Natural Rubber (DNR) which means there is no latex in the product. The foam is used to make custom padding for areas of the body; especially over lacerations, bumps and bruises. The foam can also be used in conjunction with taping applications for added protection and abrasion comfort. Additional uses for the Jaybird & Mais 30/31 Adhesive Foam include padding for prosthetic devices. Non-sterile, for external use only. Made is the USA. Available in both 1/8" (Jaybird 30) and 1/4" (Jaybird 31) thicknesses. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information- Backing/Carrier: open cell Styrene Butadiene Rubber (SBR) foam
- Adhesive: latex-free synthetic rubber
- Release Liner: paper
- Adhesion: 60 ounces per inch (to stainless steel test panel)
- Density: 11 pounds per cubic foot
- Jaybird & Mais 30/31 Adhesive Foam is a foam substrate combined with a natural rubber adhesive on a release paper liner. The product is 100% latex-free - both the foam substrate and the adhesive coating does not contain any Dry Natural Rubber (DNR) which means there is no latex in the product.
- The foam is used to make custom padding for areas of the body; especially over lacerations, bumps, and bruises. The foam can also be used in conjunction with taping applications for added protection and abrasion comfort. Additional uses for the Jaybird & Mais 30/31 Adhesive Foam include padding for prosthetic devices. Non-sterile, for external use only. Made is the USA. Available in both 1/8 inch (Jaybird 30) and 1/4 inch (Jaybird 31) thicknesses. Made in the U.S.
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
- This product is non-sterile and is not intended to be used for specialized post-surgery applications. Please check with your medical professional prior to using in any other medical application other than it’s intended use.
- Adhesive: latex-free synthetic rubber. Carrier/Backing: open-cell Styrene Butadiene Rubber (SBR) foam. Release Liner: paper.. Adhesion: 60 ounces per inch (to stainless steel test panel). Density: 11 pounds per cubic foot.
