Product Review

Liberally apply an even coat using a paint pad, low-pressure, solvent-resistant sprayer, roller or brush. Do not use a towel or sponge. Distribute Enhancer Pro??? evenly over entire surface. Uneven penetration will result in blotchy appearance. Allow Enhancer Pro??? to penetrate surface for 15-20 minutes. Denser material may require more time to penetrate. Thoroughly wipe surface with dry cloth to remove all excess Enhancer Pro???. DO NOT ALLOW ENHANCER PRO??? TO DRY ON SURFACE. Failure to remove Enhancer Pro??? from surface may result in residue that may need to be mechanically removed. A second coat may be needed for more absorbent surfaces. If darker appearance is required Enhancer Pro??? should be applied one hour after initial application, as directed in steps 2-4. Full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. Clean equipment with mineral spirits.