Convert your hinged door into a self-closing one with the KC10HD Safety Spring Door Closer. Installation is a breeze thanks to the closer and plastic slide plate being surface mounted – within minutes you can have a self-c...

Buy Now From Amazon

Product Review

Convert your hinged door into a self-closing one with the KC10HD Safety Spring Door Closer. Installation is a breeze thanks to the closer and plastic slide plate being surface mounted – within minutes you can have a self-closing door! Use this spring door closer on doors up to 150 lbs. It can also be used on both left and right-handed doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. They are U.L. listed with a ½ hour fire rating and have a 1" wide base, 4-1/4" hole center spacing and 4-3/4" arm. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door's distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, brown, chrome plated and satin chrome plated. Be sure to view the manufacturer's How-To Installation Video also linked to this page, in the upper left hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease.

  • EASY DIY PROJECT – Thanks to these Prime-Line KC10HD safety spring door closers, your next to-do is quick and easy. Use these door closers to convert hinged doors to self-closing ones.
  • INCLUDES – (1) Surface mounted spring-loaded door closer, tensioning rod, slide plate and hole plugs to cover adjustment holes in closer body after desired tension has been set.
  • INSTALLATION NOTE – Make sure the closer and tension arm rest on the same plane, not at an angle due to your molding offset. This spring door closer can generate up to 150 pounds of closing force and can be used on both left and right-handed doors adjustment holes in closer body after desired tension has been set.
  • ADJUSTABLE TENSION – Easily adjust the tension on this safety spring door closer. These closers also feature adjustable closing speed. DO NOT adjust more than 4 quarter turns of the tension arm, or spring failure can happen.
  • PRODUCT MAINTENANCE– To alleviate spring noise suggested product to use is wheel bearing grease on spring coils when spring is not under load (no other product suggested)
  • NOTE - This product is rated for 150 pounds of closing force, (weight of door + wind force trying to keep door open) two may be needed to close if you live in a windy area and have a heavy door

Similar Products

Spring Hinge Door Closer, Fits on Most Door Butt Hinge Pins, 4 PackNational Hardware N248-435 V238 Kickdown Door Stop in WhitePrime-Line KC16HD Safety Spring Door Closer - Easy to Install to Convert Hinged Doors to Self-Closing - Diecast Construction (4-1/4" Black, Non-Handed)Ultra 68405 Spring Door Closer, Butterfly Spring, Pack Of 2AmazonBasics Self-Closing Door Hinge, 3.5 Inch x 3.5 Inch, 1 Piece, Antique BrassSafety Spring Door Closer, 4-3/4 in. Arm, Diecast Construction, Brown, Non-Handed, Pack of 1AmazonBasics Self-Closing Door Hinge, 3.5 Inch x 3.5 Inch, 1 Piece, Satin NickelWright Products VWC50WH VERTICAL CLOSER, WHITEPrime-Line KC60HD Safety Spring Door Closer - Easy to Install to Convert Hinged Doors to Self-Closing - Diecast Construction (4-1/4" Satin Chrome, Non-Handed)