Product Review
Use it for any 8.4v-9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya!
Features
*Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).
*Recommended battery packs with capacity of 600-2000mAh.
*Able to auto distinguish bad battery and indicate malfunction.
*Able to activate over-discharged cells.
*Current ram-up way benefits cell capacity and life cycle.
*Automatically stop when battery pack is fully charged by Delta Peak detection.
*Short circuit & reverse polarity protections.
*Built in mini male tamiya connector.
Includes
*Smart AC Charger for 8.4-9.6V NiMH Battery Pack
*Instruction Manual
*Mini Tamiya to Standard Tamiya Adapter
Specifications
Rating Input Voltage: 100~240V AC 50/60Hz
Rating input current: 2Amp
Input power: <11W
Output voltage Rating: 8.4V/9.6V VDC
Output voltage range: 7V DC~12DC
Charge Current: 600+_60mA
Trickle Current: 200+_20mA
Max Output Power: 7.3W
Operating Temperature: -10~30*C (UL Certification)
Charging Temperature: <60Å¡C
Storage Temperature: -30~85*C
Maximal -Delta V: 5mV/cell
Cell Voltage: <1.56V/cell
Operating Humidity: <90%
*Don't use the charger for low capacity (under 600mAh), high capacity (over 2000mAh) or non-rechargeable battery packs. There is a timer cutoff of 5 hours; battery packs over 2000mah may not fully charge.
WARNING - DO NOT CHARGE LiPO Batteries
-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.
-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery.
*Failure to follow these warnings may result in fire or personal injury.
*Contact our customer support team if you are unsure if your battery can be charged.
