Product Review

Interlux VC Performance Epoxy Boat Bottom PaintSold as kit Makes 2 Gallons.VC Performance is a fluoro microadditive bearing two-part epoxy for use on the underwater surfaces of high performance boats. Apply to gelcoat, bare fiberglass, epoxy and primed metal surfaces. Dries to a hard, somewhat slippery, semi-gloss white finish that is ideal for wet sanding and burnishing. The hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water (not requiring antifouling properties). VC Performance has no antifouling or foul release properties.Specifications: Finish: Semi-gloss Mix Ratio: 1 : 1 by volume Number of Coats: 3-4 as needed Coverage: 199.9 ft²/gal by sprayInterlux Reducing Solvent: Thinner; thin, if necessary, after induction *****WILL SHIP TO CONTINENTAL 48 STATES GROUND ONLY****How To ApplyAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup NUMBER OF COATS: 3-4 DRY FILM THICKNESS PER COAT: 3.6 milsCOVERAGE: 200 sq. ft/gal. APPLICATION TEMP: 50F Min. / 95F Max.THINNER: Reducing Solvent 2316NDRY TIMES:TempTo TouchTo RecoatPot LifeTo Launch95F2 HR4 HR4 HR3 DAY73F2 HR5 HR5 HR4 DAY50F3 HR6 HR6 HR7 DAYNote: Maximum Immersion Times are as follows: 10-35C/50-95F - 60 daysBARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wipe with Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Wipe with Fiberglass Solvent Wash 202.BARE METAL: Sandblast or grind to bright metal finish. Immediately apply Viny-Lux Primewash 353/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours.CLEAR EPOXY: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wet sand with 80 grade (grit) paper. Wash down with fresh water. Wipe with Fiberglass Solvent Wash 202.APPLICATION INFORMATION: Apply 3 coats of VC Performance Epoxy. VC Performance Epoxy is designed f