Track Price :: Reviewing Millions of Products!

Tapes Master 1" x 36 Yds 1 Mil Kapton Tape - Polyimide High Temperature Heat Rresistant Tape with Silicone Adhesive - No Residue
Tapes Master 1
Disclaimer: As an Amazon Associate I may earn from qualifying purchases

1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent res...

Buy Now From Amazon

Product Review

1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).

Technical Data Sheet:

Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards

Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

Kapton is a registered trademark of DuPont

  • Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. Rosh approved and Halogen Free
  • High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
  • No Residue after Peeling Off: Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity
  • Protection, Insolation and Bonding: Protection of gold fingers: of printed circuit boards during wave solder or solder dip process. Insulation and Bonding for electrical switches, motor, lithium battery under Grade H
  • Surface for 3D printers: Kapton and ABS adhere to each other very well, therefore is the recommended use of Kapton as a bed surface for 3D printers

Similar Products

3M 4905/CLR055 Scotch 4905 VHB Tape: 1/2" x 15 ft, ClearMXRS Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14 (3 Pack)BNTECHGO 10/12/14/16/18 Gauge Silicone Wire 600V 30 feet(3ft Black and 3ft Red: 10 AWG,12 AWG,14 AWG,16 AWG and 18 AWG) Flexible High Temperature Resistant Electric Wire Strands of Tinned Copper WireKatzco Eyelet Grommet Pliers Setting, Steel Hole Punch Eyelet Setter Kit - for Leather, Canvas, all Fabrics Men and Women Clothes, Shoes, Belts, Bags, Crafts - 100 Extra Gold eyelets and grommets1 Mil Kapton Tape (Polyimide) - 1/2" X 36 YdsNeutrik NAC3MPB-1 AC Powercon Receipt-Out, GrayNeutrik NAC3MPA-1 AC Powercon Receipt-In, BlueHappybuy Reflow Oven T962 110V Reflow Soldering Machine 800W 180 x 235 mm Professional Infrared Heater Soldering Machine Automatic Reflow Machine (T962 110V)Neutrik NAC3FCB AC Powercon Cable End-Out, Gray
Copyright © 2021 Track Price - All rights reserved