Product Review

Dries fast to a highly tacky, elastomeric film. Oxygen sensor safe. Highly resistant to automotive fuels and oils. Remains tacky indefinitely - can be applied in advance for convenience in assembly. Temperature range -65 degree F to 450 degreeF. Applications: bond and seal any type of cut gasket including: rubber, felt, cork, paper, metal. Directions for use: provide adequate ventilation. Surfaces should be free of oil, dirt and grease. Mask areas that should not be coated. Shake can with ball agitator for one minute. For best results, aerosol can should be at room temperature before spraying. Holding can 8 to 10 inches from the surface to be coated, with can in upright position, press the nozzle and spray the product uniformly. Apply to flange surfaces and both sides of the gasket and the bolt threads. Avoid overspray. For best coverage, 2 to 3 light coats are required. Wait for the solvent to evaporate before assembly. The product can be applied in advance and still remain tacky when assembled. Do not smoke while using this product. Container size: 12 oz can. Red color.