Track Price :: Reviewing Millions of Products!

TEN-HIGH 40W CO2 Laser Tube 700mm D50mm, Wires Preconnected with Coating, for Laser Cutter Laser Engraving Cutting Machine
TEN-HIGH 40W CO2 Laser Tube 700mm D50mm, Wires Preconnected with Coating, for Laser Cutter Laser Engraving Cutting Machine
Disclaimer: As an Amazon Associate I may earn from qualifying purchases

Introduction
Model:CO2-TUBE-40W-70CM
Output Power:40W
Wavelength:10600nm
Working Voltage:15KV (Trigging Voltage=22KV)
Working Current:15mA
Divergence:1.95(beam diameter)
Dimensions:Length 7...

Buy Now From Amazon

Product Review

Introduction
Model:CO2-TUBE-40W-70CM
Output Power:40W
Wavelength:10600nm
Working Voltage:15KV (Trigging Voltage=22KV)
Working Current:15mA
Divergence:1.95(beam diameter)
Dimensions:Length 700mm
Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value)<1ms
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10 to 40centidegree), relative humidity<85%.

  • ★ Power: 40W; Length: 700mm; Diameter: 50mm; Item includes: 1 x tube.
  • 【Wires Pre-Connected】For easy installation, the high voltage end and low voltage port have been connected in advance. If any support needed when installing, feel free to contact us.
  • 【Quality Assurance】Each tube is tested before shipping and we will provide a safe packaging. If any problem after receives the tube, do let us know. We are willing to provide the best services and will provide 3 months warranty (except man-made damage).
  • 【Advantages】All of our tubes are coated with nano gold catalyst, compared to non-coating one, its power increase about 7-20W. Uses TEMOO mode for output, high spot concentration, higher energy and more stable power. Apply unique glass metal sealing technology, and ensure a longer service life.
  • 【Application】This CO2 laser tube is mainly used for laser cutter or laser engraving machine, which can carve and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.

Similar Products

CNCOLETECH 3PCS Si Mirror Coated Gold Dia:20mm For CO2 Laser Engraving Cutting 40W-150WMCWlaser 2 Set High Voltage Wire Connector Between CO2 Power Supply and CO2 Laser Tube for Laser Cutting Machine high Voltage Head18mm Laser Head w/Air Assisted. Ideal for K40 MachineCNCOLETECH 18mm ZnSe Focus Lens for CO2 10600nm 10.6um Laser Engraver/Cutter Dia:18mm FL: 2" or 50.8mmTEN-HIGH Diameter 18mm Focal Lens for CO2 Laser Cutting Engraving Machine, FL: 2" (2"/50.8mm)CNCOLETECH CVD II-VI ZnSe Focus Lens Dia:12mm FL:2" or 50.8mm for CO2 Laser Engraving Cutting Engraver/Cutter 40W-200W3 mm 1/8 x 12 x 12 Inch Premium Baltic Birch Plywood, Box of 16 B/BB Grade Birch Veneer Sheets, Perfect for Laser, CNC Cutting and Wood Burning by WoodpeckersCable Carrier Drag Chain Semi Enclosed Type Plastic Towline Machine Tool Nested (10 x 15mm)YaeCCC 40W Power Supply for Co2 Laser Engraver Cutter Machineuxcell Black Plastic Drag Chain Cable Carrier 10 x 15mm for CNC Router Mill
Copyright © 2021 Track Price - All rights reserved