Product Review

Passive Power-over-Ethernet (PoE)
• allows low cost of delivery of power over the network cable.
• This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable

This device provides power
• Powers 802.3af devices - but it does not have any autonegotiation - power is Always On.
• The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm DC jack
• The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable

To use as a splitter
• a 2.1mm to 2.1mm jumper cable is required.

Other Options
• If you need a gigabit data rate - see our WS-GPOE-1-WM device.
• Most PoE devices - even those that state "12v, PoE" need 48 volts when powered via the Ethernet cable.
• See our kits with 48v power supplies for up to 16 devices.
• Also available is a 1.35mm version WS-POE-IO-1.35 with injector and splitter as a kits
• Or the WS-POE-IO which is a 2.1mm version
• Size is 29 x 19 x 60 mm + 5 mm on each side for the mounting tabs.