Product Review

Replace up to 12 individual injectors with this single gigabit POE module.

Rack Mounted PoE injector

Extend power to 328 ft or 100 meters

This device offers
* 12 shielded RJ45 jacks with Data + Power out
* power per port limited to 650 ma
* 12 shielded RJ45 jacks Data to your switch
* 2x 2.1mm x 5.5mm DC power jacks - primary and secondary DC power
* LED power status
* LED power usage status per 4 ports
* 10/100/1000 operation
* we offer 7 different power supply options

Used to provide PoE power to:
* IP phones like Polycom, Cisco, Yealink
* WiFi Access points
* IP Cameras
* 802.3af devices

Two power supply inputs Mode A: provides power on the data lines 1 and 2, and 3 and 6. This is used by all 802.3af (48 volt) systems.
Mode B. provides power on the data lines 4 and 5, and 7 and 8. This is used by 24v systems like Mikrotik and Ubiquiti .
All devices receive the same voltage - choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more

We offer 24v, 48v and 56v supplies, with 60 and 120 watt versions, also 1 and 6 port versions.

LED status show power for all 12 ports, and for each group of 4. For each group of 4 port an LED indicates:
Port current 0 to 20ma = LED off
Port current 20 to 400ma = LED is green
Port current >400ma = LED is red

Full details and data sheet at our web site