This DC5V 2A Switching Power Supply is especially recommended for PIXEL LEDs (you can control until 50 units of our Pixel LEDs with this Power Supply) and other LEDs or systems with DC5V of working voltage.

...

Buy Now From Amazon

Product Review

This DC5V 2A Switching Power Supply is especially recommended for PIXEL LEDs (you can control until 50 units of our Pixel LEDs with this Power Supply) and other LEDs or systems with DC5V of working voltage.

MORE TECHNICAL DATA:

Input:
- Voltage: AC100-240V
- Frequency: 50/60hz
Output:
- Working Voltage: DC5V
- Working Current: 2A
-Electric Consumption: 10W

Dimensions: L2.87" x W1.10" x H1.57"

DC Jack Type: 5.5 Barrel Connector
Input Plug: US Wall Mounting Plug
Output Plug: DC Power Male Jack Plug - 5.5 Barrel Connector (0.36" x 0.21" / 10mm x 5.5mm)
Output Cable Length: 59.05"
Output Connection: If you cut the cable to install your LED Lights (when you don´t have a connector), you will find two wires: Black Wire: "-" and Gray Wire: "+".
Safety-isolation
For Indoor Use Only (in dry conditions) / Non-Waterproof

Special Notes:
For optimum performance, do not exceed maximum load.
For best use, the Power Supply should be 20% (approx.) stronger (Amps) than the total required to run your system.

FREE TECH SUPPORT: WE PROVIDE YOU WITH TECH SUPPORT BY PHONE, EMAIL AND IN PERSON AT OUR OFFICE. OUR TRAINED TECHNICIANS CAN HELP YOU SO YOU CAN START ENJOYING YOUR NEW PURCHASE! JUST CALL US: (786) 520-3320. All trademark and copyright laws apply.

  • Accepts 100-240V AC 50/60Hz input and delivers a stable 5V DC output. Ideal for devices drawing less than 2A (recommended ≤80% load for best performance).
  • Features a 5.5mm outer / 2.1mm inner barrel plug (positive “+” inside, negative “–” outside), ensuring secure compatibility with most 5V-powered electronics and LED devices.
  • Built to meet UL safety standards. Includes protection against overcurrent, overload, and short circuit, ensuring reliable and safe operation during continuous use.
  • Perfect for 5V LED strip lights (WS2811, WS2812B, SK6812, APA102), Blink cameras, WiFi routers, modems, Bluetooth speakers, toys, and other low-voltage DC electronics.
  • Compact plug-in design with a 3.2 ft cord allows for quick installation in home, office, or workshop environments—no wiring required.

Similar Products

Hakko 599B-02 Solder Tip Cleaning Wire and HolderAven 17542 Desoldering Wick, 2.5mm Width, 5' LengthArduino Uno R3 Microcontroller A000066Fantastic Beasts and Where to Find Them