LE 16.4ft LED Strip Light, Super Bright, 300 LEDs SMD 5050, Non-Waterproof LED Tape, Flexible Rope Light for Home, Kitchen, Under Cabinet, Bedroom, 12V Power Supply Not Included, Daylight White

Product Review

Description

PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~25VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install.
Automatic Induction

When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V; During the delay time if motion detected, the delay time will reset, and start a new delay time.
Application

Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
< Specification

Passive Infrared Sensor
Operating voltage DC: 12V
Load current : 3A
Delay time: Default setting 5-25s (2~280 Seconds adjustable)
Detecting range â‰¤ 110 degrees cone angle
Detecting distance4M-7M (10cm-7M adjustable)
Trigger way : Continuous triggering
Blockade time: 0 seconds
Size: 48*25*14 mm
Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time
Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance

Note:

1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition.
3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
4. Don't fix the motion sensor switch in strong shock or vibration environment.

【Warm Tips】： To figure out your values for the Sensitivity , Please set the delay time to its minimum value first , this will save your time.
【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting.
【Delay Time Adjustable】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it.
【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting.

Track Price :: Reviewing Millions of Products!

SENSKY BS010H DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led Lighting (Black-without Light Sensor)

Product Review