Connect a compatible device directly to an Ethernet cable can result in speeds two or three times faster than Wi-Fi
System Requirement: Windows XP / Vista / Win 7 8 or up, Linux 2.6.4 or up, Android 2.1 or up, and Mac OS...

Buy Now From Amazon

Product Review

Connect a compatible device directly to an Ethernet cable can result in speeds two or three times faster than Wi-Fi
System Requirement: Windows XP / Vista / Win 7 8 or up, Linux 2.6.4 or up, Android 2.1 or up, and Mac OS 10.6 or up
This network adapter built-in a DC-in jack for external power support, it works with 5V USB charger

Feature
Driver Provider: Realtek
Chipset: RTL8152
Micro-USB cable length: 0.8 feet / 25 centimeters
Support all USB standard commands
Support TCP/IP, NetBEUI, ipx/spx transfer protocol
Half/Full duplex 10/100Mbps operation
Support Wake-on-Lan (WoL) and RealWoW
Switch 10/100Mbps network automatically
Support IEEE 802.3/802.3U/802.3x/802.1/802.1Q/802.3az-2010 protocol
Compliant to USB1.0/1.1/2.0/3.0
Extremely low power consumption
Independent MAC network address

TESTED:
Works with NetBooks, Notebooks, Ultra Books, MacBook Air Lion and Mountain Lion 10.6 or above.
Works with Nexus 7 1st gen, up to Android 4.4.4. and Nexus 7 2nd gen, with Android 5.0.1 or later.
Works with Samsung's newer tablets that have an ETHERNET menu in Android Settings such as Tab4 8in and 10.1 in, Tab PRO, Note PRO, Tab-S.
All other models of Samsung Tablets without an Ethernet menu DO NOT support this Ethernet adapter
Works with Android "Stick Computers" such as MK802, MK808 and UG802. Some Sticks may need a powered USB hub

EXCEPTIONS: This Micro USB Ethernet with 3 Port Hub will not work if tablet manufacturers have not included an Ethernet (wired internet) capability in their version of the Operating System. For this reason, the following ANDROID tablets can not use this adapter: Samsung tablets, ACER, Lenovo, Sony, Coby-Kyros. Toshiba models "Thrive7", AT200" (ExciteLE) will not work with this adapter. This adapter will not Enable a tablet that is not configured to work with Ethernet. Consult your Manufacturer or your applicable web forum if you are uncertain.

  • Host OTG cable to 3 USB & LAN adapter -- Adds additional 3-Port OTG USB extension; Adds 10/100 Mbps wired internet connectivity
  • Driver-less design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 6.0 or up operation system, Chrome OS
  • Compatible with Raspberry Pi 2, Amazon Fire TV Stick, notebooks, Tablets, and computers with one available micro-b port
  • Built-in DC power port, supports 5V power adapter, a power cable included; It only powers USB 2.0 HUB and NOT the host; It charges the added USB device
  • It has limited Android compatibility. Android users, before you buy, be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then

Similar Products

Zebra Zero Heatsink Case in Black Ice for Raspberry Pi Zero 1.3 and Wireless by C4LabsMiuzei Raspberry Pi 4 Case with Fan, 3× Heat-Sinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B (Pi 4 Board Not Included)Vilros Raspberry Pi Zero W Basic Starter Kit- Black Case Edition-Includes Pi Zero W -Power Supply & Premium Black CaseCanaKit Raspberry Pi 4 Basic Kit (4GB RAM)CanaKit Raspberry Pi Zero W (Wireless) Complete Starter Kit - 16 GB EditionVilros Raspberry Pi Zero W Complete Starter Kit-Premium Black Case Edition-Includes Pi Zero W and 7 Essential AccessoriesPlugable USB 2.0 OTG Micro-B to 100Mbps Fast Ethernet Adapter Compatible with Windows Tablets, Raspberry Pi Zero, and Some Android Devices (ASIX AX88772A chipset).Micro USB Ethernet Adapter with USB OTG Hub Compatible TV Stick, Chromecast Ultra/2/1/Audio, Google Home Mini (RJ45 LAN Wired Internet)HDMI Swithcer 4X1, NIERBO HDMI Quad Multi-Viewer HDMI Switcher 1080p HDMI Splitter Seamless IR Control EU 3D Support 5 Modes for PS3/PC/STB/DVD (Style 1)Official Raspberry Pi Zero W Case