System Three 3105S16 White Silica Thickener, 1 Quart Tub

Product Review

TotalBoat TotalFair is a lightweight two-component marine epoxy repair putty that can be used for fairing, filling, shaping, and repair. Use above or below the waterline on fiber reinforced plastics (FRP), aluminum, steel, and wood. Its 1 to 1 mix ratio by volume changes to a green color when the individual blue and yellow components are mixed properly.

Easily spread this creamy consistent surfacing filler. At 80Â°F, TotalFair is sandable in just 3 hours. Be sure to wear protective gloves when mixing, and a proper respirator when sanding cured TotalFair. Do not apply Gelcoat directly on cured TotalFair or the Gelcoat will not cure properly. Apply TotalBoat 2-Part Epoxy Primer or TotalBoat TotalProtect Barrier Coat before applying Gelcoat.

Compare TotalFair to Interlux Watertite Epoxy Filler, Awlgrip Awlfair,System 3 Quikfair, Sculpwood, 3M premium marine filler, Pro Set, 4100, Pettit EZ Fair and other popular 2-part epoxy putties. Ideal for fiberglass, steel, wood, cast iron, and aluminum repairs on hulls, decks, topsides, keels and more. All TotalBoat products are developed by boaters, for boaters. We know what works and what doesn't. 100% made in the USA.

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair

Track Price :: Reviewing Millions of Products!

TotalBoat TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel

Product Review