Ortofon Replacement Stylus 2M Blue

Product Review

Blue Jeans Cable LC-1 Stereo Audio Cables, 3 foot

This pair of stereo audio cables is manufactured by Blue Jeans Cable in our assembly shop in Seattle, Washington. The cable stock, LC-1, is our own proprietary design: a low-capacitance cable with a pair of heavy 95% coverage bare copper shield braids for the maximum in low-frequency noise rejection. The two cables in the pair are separate--not joined to one another--for high flexibility.

What Makes a Good Audio Cable?

There's a lot of nonsense on the internet about fancy analog audio cables; the reality is that the requirements for unbalanced (or, if you like, "RCA") audio cable are very simple, if seldom properly addressed. As a high-impedance circuit, an analog audio signal is subject to high-frequency rolloff from excess capacitance, which is caused by conductors being too near each other or separated by a low-quality dielectric. And because unbalanced audio is not balanced, there is no common-mode noise rejection; noise rejection depends entirely upon shield effectiveness.

The LC-1 Design

We designed LC-1 with a small center conductor and a large diameter PE foam (or, if you prefer fancy terms, "nitrogen-injected") dielectric, resulting in extremely low capacitance -- about 12.2 pF/foot. Outside of that dielectric, we put two bare copper shield braids, each with 95% coverage; at audio frequencies, braid is far more effective than foil, and this is as heavy a shield as you'll find on any audio interconnect.

Designed, Cabled and Assembled in the USA

The bulk cable stock is made to our design by Belden in Richmond, Indiana, and we assemble these cables in our shop in Seattle, Washington.

UNIQUE DESIGN: LC-2 isn’t a standard stock cable; we designed it specifically to optimize performance in unbalanced (“RCA”) analog audio, with coaxial geometry but with lower capacitance and better shielding than any ordinary coax.
HEAVY SHIELDING: LC-2 is shielded with two high-coverage bare copper braids, one laid directly over the other. This provides the best possible shield performance at audio frequencies and lowest resistance to help prevent ground loop hum.
LOW NOISE: Not only does our shield configuration provide effective EMI reduction, but it also avoids the problems with triboelectric noise which “combination” shields can cause – particularly important with low signal levels such as phonograph connections.
LOW CAPACITANCE: Capacitance in interconnects can cause high-frequency rolloff. The large spacing between shield and center conductor, and the use of a highly foamed dielectric, keep LC-2’s capacitance around 12 pF/foot.
HIGH FLEX: LC-2 is a thick cable – but is surprisingly flexible, with a soft PVC jacket and foam dielectric.
QUALITY PLUGS: Our Taversoe RCA plugs, gold-plated on all contact surfaces, grip the RCA jack with a circular leaf spring – providing firm engagement without jack-damaging excessive tightness.
FROM SEATTLE, WASHINGTON: All LC-2 cable assemblies are built by American workers in our cable shop in Seattle, Washington.

Track Price :: Reviewing Millions of Products!

Blue Jeans Cable LC-2 Stereo Audio Cables (Black, 3 Foot)

Product Review