Product Review

Overview:
- The static strap function, Wrist Strap Tester can quickly and easily check the following:
Test static strap and ground wire connection
Test the impedance between skin and Static strap
Test the connection during anti-static access panels, cushion for connecting ground

Feature:
- Quickly and easily check ground systems at any place
- Avoid static electricity to damage the product
- Ensure staff safety

Specification
- Instruction Impedance calibration: Buzzer
- Low(red): R<800K ohm OFF
- Good(green): 800K ohm<=R<=9M ohm ON
- High(red): R>9M ohm OFF
- Outside size: 80(W)x40(H)x117(D)mm
- Power source: 9V battery
- The length of grounding wire: 2.5m

Operation:
- Insert the banana plug on the end of the static strap ground cord into the jack located on the front of the wrist strap tester
- The wearer of the anti-static wrist strap then pushes the metal pushbutton on the wrist strap tester
- A properly operating wrist strap will give an "OK" LED indication on the anti-static wrist strap tester. If either RED "FAIL LOW" or YELLOW "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap should be discarded and replaced with a new one
Note: After about 50,000 cycles of operation, when the green "GOOD" LED will light up, but did not issue a sound, Replace the battery