Track Price :: Reviewing Millions of Products!

PoE Texas PoE-Tester | Inline Tester for Power Over Ethernet | Display 20 to 56 Volts, 0-5 Amps and Display Actively Used Power 802.3af/at and Passive PoE at 10/100/1000 Data Rates
PoE Texas PoE-Tester | Inline Tester for Power Over Ethernet | Display 20 to 56 Volts, 0-5 Amps and Display Actively Used Power 802.3af/at and Passive PoE at 10/100/1000 Data Rates
Disclaimer: As an Amazon Associate I may earn from qualifying purchases

The PoE Tester Quickly Identifies PoE on Any Cable. Great for testing PoE Cameras, IP Phone and Wifi Installations - This PoE tester belongs in every tool kit!
The tester will display the power used, voltage ava...

Buy Now From Amazon

Product Review

The PoE Tester Quickly Identifies PoE on Any Cable. Great for testing PoE Cameras, IP Phone and Wifi Installations - This PoE tester belongs in every tool kit!
The tester will display the power used, voltage available, and current flowing. Simply connect the RJ45 from your PoE switch or injector to the RJ45 input, then connect inline to your camera, phone, wifi or other 802.3af/3at PoE device.

Product Features
Quickly diagnose PoE problems
Easily detect how much power any PoE or DC powered device requires
Measure available voltage at the remote end of a PoE connected device
Observe loss in the Ethernet cable
Mode A display from 20v to 56 volts
Mode B display from 20v to 56 volts
DC input display from 5v to 56 volts
Measure PoE currents up to 500 ma (28 watts)
Use the 2.1mm DC connectors to measure voltage and current / power in 24, 48 and 56 volt installations
DC current up to 5 amps
2.1mm to 2.1mm jumper included
Bright, easy to read LED display - alternates between Voltage, Current and Power
Powered by PoE - No batteries required

  • PoE Tester/Detector for passive, 802.3af and 802.3at applications, 10/100/1000 data rates
  • Measures and displays Voltage, Current and Power while allowing full ethernet operation
  • Separate RJ45 inputs to test mode B PoE (pins 4,5 7,8) and Mode A (Pins 1,2 3,6) from 20v to 56 volts - Included DC Jumper allows you to test DC power supplies from 5v to 56 volts
  • Powered by PoE - No Batteries Required; Instruction Manual Included
  • 1 YEAR WARRANTY. For expert technical support from Austin, TX - call 512 479 0317

Similar Products

PoE Detector for IEEE 802.3 or Passive PoE - Quickly identify Power over Ethernet; Display Indicates Passive or 802.3af/at; 24v, 48v, or 56v; and Mode B Reverse PolarityDBPOWER TD0091 Sc-8108 5E 6E Cat5 Rj45 Network LAN Phone Cable Multifunction Tester Meter, GrayKlein Tools VDV226-110 Wire Crimper/Wire Cutter/Wire Stripper Pass-Thru Modular All-in-One Tool for Video, Telecom, Datacom and moreSingle Port PoE Injector for Power Over Ethernet - 48 Volt 15 Watt UL Power Supply Included (Gigabit Data)PoE Texas GPOE-4A-48v48w | Gigabit Passive PoE 4 Port Power Over Ethernet Injector with 48 watts for 802.3af Devices | Includes 48 Volt Power SupplyPoE Texas Power over Ethernet 12 volt 802.3af Splitters - Power any 12 volt device including IP cameras or Arduino at 330 ft with Data (Gigabit 12 volt 12 watt)Eclipse Tools 900-244 Pro'sKit Banjo Adapter, 4-6-8 PinCable Matters Keystone Punch Down StandPlatinum Connector Shielded ESD CAT6 Connector 50 Pieces with 50 Boots/Strain Relief -RJ45 End Pass Through Ethernet Modular Plug secures ESD Drain Wire for 24-23AWG CableCalDigit USB-C Pro Dock - 85W Charging, Thunderbolt 3, UHS II SD Card Slot, USB C Gen 2, USB A x 3, Dual DisplayPort 1.2, LAN, 3.5mm Audio for Thunderbolt and USB-C Computers (0.7 Meter Cable - Gray)
Copyright © 2021 Track Price - All rights reserved