Product Review

NOTE: These are extended-length lug bolts and are meant to be used with wheel spacers.

NOTE: Double check the Thread Size,Shank Length, and Seat you need before purchasing. Installing incompatible hardware can cause damage to vehicle components and may cause lug bolts to loosen while driving.

Specifications:
Thread Size: 14x1.5
Color: Black
Seat Type: Cone Seat (60 Degree Taper)
Shank Length: 40mm

Compatibility:
Only Audi, Mercedes, & Volkswagen that use 14x1.5 Lug Bolts.

Audi
1999+ TT
1998+ A3
2000+ S3
1996+ A4
1992+ S4
2008+ A5 / S5
1995+ A6 / S6
1997+ A8
2001+ S8
2016+ A7
2013+ S7
2009+ Q5
2007+ Q7
2012+ SQ5

Volkswagen
1985+ Beetle
2007-2016 EOS
1999+ Golf
2006+ GTI
2000+ Jetta
1998+ Passat
2009+ Tiguan

Determine what Shank Length is needed
1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt).
2) Measure the thickness of the spacer being used.
3) Add measurements from step 1 and step 2, and you have the shank length needed.

Difference between Cone and Ball seat
This is determined by your wheel's lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheel's lug seat. The most common seats are Cone (conical) and Ball (radius). Cone type features a straight taper seat, whereas Ball type features a curved seat.

IMPORTANT: Check Before Purchasing
- Vehicle must use 14x1.5 threaded lug bolts.
- Shank Length: Verify this 40mm Shank Length Bolt is the correct size. Buyers must measure their OEM bolt and spacer to determine if this is correct.
- Seat Type: Check your wheel lug hole. These bolts will only work if your lug holes are Cone Seat (60 Degree Taper).