Product Review

Brand: TOGU

Handle Material: 1.2mm Wall Thickness Commercial Grade-304 Stainless Steel

Mounting Outstandings and Fastening Screws Material: 100% Solid German Standard Commercial Grade-304 which will result in a very long durability and usage.

Total length: 900mm / 35.433 inches

Center-to-Center Mounting Distance: 760mm/29.921 inches

Cross-Section Diameter: 32mm/1.26 inches

Finish: Full Brushed Stainless Steel

Door Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 2.36 inches door thickness.

Note: Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.

Steps for Installation:

Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance.

Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls.

Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process.

Warranty Description : Limited Lifetime Replacement Warranty