Product Review

Notes:

When crimping the wire, press it to the upper and lower molds. If the micro touch is pressed on the upper and lower molds, the parts will be damaged.
When using the wire clamp, the clamp head and the die are prohibited from knocking to avoid deformation and damage.
Wires should not be used in acid and alkali and corrosive gases
Wire clamps must maintain sufficient filtered 32 mechanical oil


WARNING: Penson suggests you to which is to Stop crimping when the dies touch, anymore pressure is applied by people who are not mechanically inclined at all.

If people bottomed the die out then squeezed the tool 3 to 4 more pumps after the dies bottomed out which with 10 tons pressure, the tool showing a bent shape with stress cracks

If you have any questions, please contact us and we will provide a hundred per cent satisfactory service.