Product Review
Specification:
Color: Silver
LED light: Pure White
Connector type: E27
Detection range: ≤5m
Detection angle: About 120°
Power: 5W
Rated voltage: 85-265V
Product dimension: 5W 111mmx58mm
Package Included:
2X E27 PIR Motion Sensor Detection LED White Light Lamp Bulb
PLEASE PAY ATTENTION:
If you installed the bulb on the top, the lamp must be down and the person pass within 120 degrees.
If you installed it on the sideway, then the height can not exceed 2 meters, the best distance is 1.5 meters.
It is normal phenomenon if you install correctly, POST (Power On Self Test) time is about 120 seconds. At the same time the bulb just can be light up in dim situation.
This sensor bulb just can be down light only. It won't sensor and light up if you up light, and it will light up but just little bright after you reinstalled it.You can learn from the sixth picture.
Operation instruction:
1.Bulb can be installed near stair, better to let bulb head turn to exit/entrance
2.The bulb should be keep far away from heater, air condition, fridge, stove, such places which temperature is high and sensitive (over absolute zero degree object will probably make bulb light up)
3.Do not put any shield, furniture, or big object around the bulb
4.Do not turn it to the window for avoiding hot air /white light perturbance, and body motion to wrongly light up the bulb 5.Do not install bulb near gate or airway
Trouble removal:
1.When install it, it will auto light up and off, occasionally it can auto light up, the reason may be there's animal moving or bulb turns to hot place, or install angle is not correct
2.If it auto light up every 8s and light off every 30s and it repeats that, now you should check whether there's person or animal moving around it, or can take the bulb to another room for checking.










