Product Review
Product Specifications:
Nut Height: 1.40 inches
Hex Size: 19mm or 3/4"
Thread Pitch: 3/8"x24
Compatible With:
Can fit on 4-Lug ATVs that use 3/8"x24 Thread Pitch studs
*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 3/8"x24 threaded studs.
- Your wheel's lug seat must have a conical, 60 degree taper cone / acorn seat.
- Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
- Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 30mm (a little less than 1.25"), these will not work for you.
- Check your wheel lug hole diameter. The included socket key is roughly 22mm in diameter. Make sure your lug holes are large enough to accommodate this tool.
- 16-piece package of Long Spline Closed End aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 3/8"x24 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Polaris ACE 500, 570, 900, Big Boss 250, 400L, 500. Hawkeye 300. Compatible with Polaris Magnum, Ranger 400, 500, 700, 800, 900. Compatible with Polaris RZR 570, 800, 900, RZR S 800, RZR 4 800, 4 XP 900, Sportsman 300, 400, 500, 570, 600, 700, 800, ACE. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have 3/8"-24 3/8x24 3/8"x24 Studs.
- Total Length: 1.40 inches | Thread Size & Pitch: 3/8-24 | Seat Type: Cone Seat | Color: Black | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool.
- These 3/8x24 lug nuts are not an oem or genuine OE part, but are compatible with various Polaris vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.
