Product Review

Add gigabit PoE to any Switch
• Proven reliability
• Mix 10/100/gigabit data and power on the same cable
• Wall Mounted PoE injector for 4 devices
• Power 802.3af devices by connecting a 48v or 56v power supply
• 4 data in, 4 Data + PoE out
• this is not a switch - you use it to add PoE to any switch or router
• extend power to 328 ft or 100 meters
• Power is on all the time

No power supply included
• We recommend our 48 volts DC, 1 amp, 48 watts Power Supply
• Power per port limited to 650 ma - self resetting fuses
• 2.1mm x 5.5mm DC power jack and 4 pin Phoenix connector

Description
These devices provide power and data in the same Ethernet cable using pins 1,2 and 3,6. (802.3af Mode A) All devices receive the same voltage. Check device specs for power needs, it is under 4 watts for most phones, other devices need more.

Applications:
• IP phones like Polycom, Cisco, Yealink
• WiFi Access points
• IP Cameras like Hikvision
• any 802.3af Device
• 12 volt, poe devices (please see our video on this topic)
• USB, 5v and 12v , non-poe devices - please see our active splitters

Other products from WiFi-Texas
• Also see our 10/100 and rackmount versions and switches
• WS-GPOES-8-7-48v60w with integrated switch
• WS-POE-8-48v60w for 10/100 speed data
• WS-GPOE-16-48v120w for more ports
• WS-POE-12-48v120w for 10/100 speeds and high power
• WS-PoE-Tester to display power used by a device
• WT-AF 5 and 12 volt splitters
• Full details and data sheet at http://wifiqos.com/