Product Review

Questions & Answers
Why do I need this funnel?
We aren't saying traditional funnels don't work, but our funnels can make for easier and cleaner oil changes for not a lot of money.

The "no funnel" approach - We've all probably been guilty of this. This is thinking you can pour a full quart of engine oil into the engine through the small hole in the valve cover from some distance above it. This is easier on some engines than others, but usually results in at least some spilled oil.

The "regular funnel" approach - Unless you can find a funnel that will friction fit into the oil fill port, they are usually too long and end up touching a baffle or something else causing restricted oil flow. Since they don't seal, if you pour oil in faster than it can drain down into the engine oil might overflow. Many times these funnels require you to hold them the entire time, otherwise they tend to fall over.

The "Motivx Tools engine oil funnel" approach - Since this funnel screws into the oil fill port, it doesn't require any holding whatsoever so you are free to use both hands. It seals to the engine with a rubber gasket so even if you pour oil in faster than it can drain down into the engine it won't leak. You can also leave single quarts of oil in the funnel to completely drain while retrieving and opening the next one.

Will this funnel fit my vehicle?
If your vehicle that has a threaded oil filler cap and isn't a Prius, it will fit. It does not fit the Prius because of hood clearance issues, and does not fit any engine that uses the tab style oil filler cap. The tab style has two metal tabs on the bottom of the cap that index with the valve cover. You can enter your vehicle information into Amazon near the top of the page to see if we have tested this funnel against the oil filler cap used on your vehicle. It it says it won't fit, take a quick look at your oil filler cap to see if it's threaded or not just to double check.