Product Review
Features:
Bright LED: 600 lumen covers up to 400square feet.
Motion sensor: Light instantly turns on when it detects motion from up to 16 feet away.
Auto shut-off: Light shuts off automatically after 30 seconds if no motion is detected.
Fully adjustable: The light mount can rotate 360degrees, the light head can swing back-forth 150 degrees.
IP65: Durable, Weather Resistant, Tight seals and UV resistant material allow the light to work in all weather conditions.
Specification:
Power: 8w
Output: 600 Lumen
Sensor mode: Motion sensor & Light sensor
Sensor angle: 90°~120°
Sensitivity distance: 16.4~22.97ft
LED Quantity: 4 LEDs*2W
IP Rating: IP65
Size: 4.33*3.94*6.5in(L*W*H)
Weight: 0.67lb
Operating temperature: -20℃ ~ 37℃
Housing material: ABS+PC
Power source: 4 X D-cell alkaline batteries (Not Included)
Troubleshooting Steps:
1. Check whether the batteries are installed correctly. Please press hard to lock the battery fastener in.
2. Check whether the sensor head is obscured.
3. Replace 4 D size fresh batteries.
4. The light will not be bright under strong light or in daytime even with switch on and batteries, once the ambient light around the unit reaches 10 lx(for example, during the day or when exposed to bright light), the light will not be activated movement, please open it in darkness.
5. Please kindly operate it at -20℃ ~ 37℃.
6. Use only new alkaline STANDARD D-Cell batteries(Height: 59.0±0.5mm, Diameter:32.3±0.2mm) with 1.5V rating.
7. Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
8. Install batteries with polarity in correct position.
9. Check whether the switch is on, if you don't use it for a long time, please turn off the switch to extend the lifespan.
10. If it still can't work well, feel free to contact us through Amazon message.









