Product Review
- Aftermarket equivalent to Radio Shack 20-546
- Includes adapter to program both mono jack (PC/IF) and stereo jack scanners
- No programming software included
- Length: 41 inches
Aftermarket Scanner Programming Cable with 3.5mm (1/8") Stereo connector for use with the following scanners:
Radio Shack: PRO-92, PRO-93, PRO-96, PRO-97, PRO-99, PRO-106, PRO-136, PRO-137, PRO-163, PRO-164, PRO-197, PRO-2017, PRO-2018, PRO-2053, PRO-2054, PRO-2055, PRO-2067, PRO-2096, PRO-404, PRO-405, PRO-426, PRO-427, PRO-428, PRO-444, PRO-496, PRO-501, PRO-515, PRO-522, PRO-523, PRO-524, PRO-525 PRO-526, PRO-527, PRO-533, PRO-649, PRO-650, PRO-651, and PRO-652.
GRE: PSR-100, PSR-200, PSR-300, PSR-300C, PSR-310, PSR-340, PSR-400, PSR-400C, PSR-410, PSR-500, and PSR-600.
MFJ: 8322
Whistler: WS-1010, WS-1025, WS-1040, WS-1065, and WS-1080.
These scanners use the cable with the included additional 3.5mm (1/8") Mono connector cable:
Radio Shack: PRO-83, PRO-84, PRO-94, PRO-160, PRO-162, PRO-2051, PRO-2053, PRO-2067, PRO-2096, PRO-433M PRO-528, PRO-79, PRO-83, PRO-84, PRO-93, PRO-94, PRO-95, PRO-96, and PRO-99.
Uniden: BC245XLT, and BC345XLT.
This device requires an FTDI USB VCP Driver. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port. A link to download the free driver is included.
