Product Review
Applications:
1979-1985 - Cadillac - Eldorado
2003-2009 -Cadillac -XLR
1977-1987 - Chevrolet - Impala
1987-2005 -Chevrolet - Blazer
1977-1987 -Chevrolet -Caprice
1982-2003 - Chevrolet -Camaro (May not fit Front Hub, contact us for more details)
1982-2004 - Chevrolet - S10 (Won't fit front hub of 2WD Models
1982-2004 -Chevrolet - S10 Blazer (Won't fit front hub of 2WD Models)
1982-1991 - GMC - S15
1990-2005-GMC-Jimmy
1990-2004 -GMC- Sonoma (Does not fit front hub of 2-wheel drive)
1967-2002 - Pontiac - Firebird (May not fit Front Hub, contact us for more details)
1964-1987 - Pontiac - GTO
1980-1985 - Pontiac - Phoenix
1984-1997 -Pontiac-Trans Am
1990-1997 - Pontiac - Trans Sport
Important Notes:
- Installation should only be performed by a trained professional.
-Make sure you get 6-8 FULL TURNS of the lug nuts before tightening.
-Failure to follow proper procedures may cause your lug nuts to come undone while driving!
- Your OEM/Factory wheel studs may extend past the surface of the spacer, if this is the case, you have 3 options.
1) Your wheels need to have cavities on the back between the mounting holes
2)The OEM/Factory studs will need to be shortened
3) You can purchase shorter studs and install them on your hub
- No returns or exchange once installed
-Please be sure to take the proper measurements before making your purchase. The Buyer is responsible for making sure that they choose the correct thickness so as to not cause the wheel/tire to rub against the fender of the vehicle.
- 【FITMENTS INCLUDE】5x4.75 to 5x4.75 hub centric Wheel Spacers fit for 1987-2005 for Blazer 1984-2019 for Corvette 1991-2005 for GMC for Jimmy || 1982-1990 for GMC for S15 ||1979-1985 for Buick for Riviera || 1979-1985 for Cadillac for Eldorado
- 【SPECIFICATIONS】5x4.75 Wheel Spacers with Vehicle Bolt Pattern: 5x120.65 or 5x4.75 or 5x120.7mm. Wheel Bolt Pattern: 5x120.65 or 5x4.75 or 5x120.7mm. Hub Bore: 70.5mm. Outer Diameter(6.102 inch),Spacer Thickness: 76mm (3.0 inch). Stud/Nut Thread Pitch: 12mmx1.5;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- 【KEY FUNCTIONS】3 inch hub centric WHEEL SPACERS with Wheel-Centric Lip.- support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- 【PERFORMANCE ENHANCEMENT】The 5x120.65mm WHEEL SPACERS HUBCENTRIC are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
- 【GARAGE CHECKING】Please recheck your vehicle compatibility,check the "Amazon Confirmed Fit" bar at the top of this page before buying product to ensure this product works for your vehicle
- 【INSTALLATION NOTES】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming
