Product Review
This 12V DC brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids. Durable brass construction and a quality copper solenoid are made to last. This valve is N/C (normally closed), meaning it is closed when power isn't supplied. The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 3/4" NPT thread.
We have solenoids available in AC/DC and various size NPT threads as well.
SPECIFICATIONS:
110V AC
Working Pressure: 0-100PSI (7Bar)
Normally Closed (Opens when powered)
Semi-Direct lift valve. Suitable for gravity feed.
Temperature Range: 23F to 176F
Orifice: 20mm
Length: 3.3"
Width: 2.5"
Height: 4.3"
3/4"NPT Both Ends
WARNING: Not for use with flammable gas or liquid. This valve is NOT explosion proof.
- [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve
- [SIZE]: 113mm*67mm (4.45 '' * 2.64 ''), thread diameter: 25mm (0.984 ''), interface pipe diameter: 3/4 '' NPT thread, flow diameter: 20mm (0.787 '')
- [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
- [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2. Working environment: water, air, compressed air and some stable gases.
- [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working.
