Product Review
How to use these paintless dent puller tools :(Suit for dent&ding and home DIY repair)Â
1.clean dent surface
2.put the glue to gun and heat,connect the power source and preheat for 5-10 minutes
3.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force.
4.immediately place pad in the center of the dent and hold until sticks
5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
6.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent.
7.Spray alcohol on the residual glue, remove it with glue scraper, clean the repaired place with a clean wet cloth
8.If dent still exists,repeat the steps to remove the dent more perfectly
Packing List:
1x LED dent board
1x Tool bag
1x black dent lifter
1x 100W glue gun
1x Pops a dent
1x rubber hammer
1x silver tap down
1x Silde hammer
1x mini T-bar
1x metal tap down with 9 heads
1x Plastic shovel
5x blue puller tabs
9x black puller tabs
4x yellow puller tabs
18x yellow glue sticks
1x manual
