Product Review
This is a ready-to-use kit of 4 SP10 asphalt anchors and a matching quantity of EPX2 grout. The SP10-38 is used in conjunction with our EPX2 grout to bond with existing asphalt. Constructed from zinc plated steel, the bottom of the anchor is flared and sealed to act as a wedge when pushing the anchor into the ground. A welded spiral along the length of the anchor provides for a strong bond with the grout. The top of the anchor incorporates a large washer with internal female 3/8" thread accomodating up to 2" bolts. Supplied with 1" washer and 3/8" x 1" hex-head bolt.
- ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout.
- LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt.
- LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.
- EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole into the asphalt and the gravel below it and fill with EPX2 Anchoring Grout (included). Push in the anchor until it is flush with the asphalt's surface and allow grout to harden. Anchors are ready for use in 15 mins to 1 hour, depending on grout and ground temperature. Once installed, anchors are flush to the ground and pose no tripping risk or roadway hazard.
- ASPHALT ANCHORS CORP: We pride ourselves on offering reliable and effective solutions for asphalt mounting. Our BoldHold anchoring products are manufactured with high-grade materials and tested to provide you with long-lasting durability you can trust.
- WARNING: Please note thaat the anchors are quite large -- 6 inch long and require a ⅞" hole. Some customers envisioned the anchors to be similar in size to expansion anchors usded on concrete. Please consider size before ordering.
