20 Pcs 4 Pin RGB LED Light Strip Connector JACKYLED PBC 10mm Strip to Strip Solderless Connector for SMD 5050 Multicolor LED Strip

Product Review

These L shape connectors for RGB multi-Color light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. They are compatible with both non-waterproof and waterproof 10mm wide RGB 5050 LED strip lights.

Installation Instructions:
1.Ensure your section of LED light strip is 10mm wide RGB 5050 LED strip and has four contacts (+, B, R and G) and all the contacts are dry and clean.
2.Open the white clasp of the connector.
3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/Cutting line area, then insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp;
If you have a non-waterproof LED strip, just insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp.
4.Close the clasp.

Note:
If the LEDs flicker or do not light up, it is because there is poor contact between the L-shape connector and the LED strip. To solve the problem, please follow these steps:
01.Power on your LED strip.
02.Open all the caps of the L-shape connector.
03.Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact point between the 4 copper contacts on your LED strip and the 4 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 4 prongs in the connector.
04. If the LEDs still do not light up, please adjust the contact point between the 4 copper contacts on the L-shape PCB board and the 4 prongs in the connector, until you see the LEDs light up. Then you can close all the caps of the connector.

Package Includes
10x L-shape connectors for RGB 5050 LED Strip Light

Compatible with both Waterproof and Non-Waterproof SMD 5050 RGB LED strip lights.
4 channel PCB chip with 2 easy-clasp connectors, Seamless extension for your RGB light strips around sharp corner
Simple but effective, tool free, easy installation by clipping system, making neat and good looking LED strips turn corners, couldn't be any easier using these connectors
With these L-shaped connectors, you can avoid twisting your led strips which potentially damages your LED strip.
Package includes 10pcs L-shaped connectors, from TronicsPros with Unique Amazon Barcode "X000XNFGCR".

Track Price :: Reviewing Millions of Products!

TronicsPros 4pin L Shape RGB 5050 LED Strip Connector LED Tape Right Angle Corner Connector Flex LED Ribbon LED Rope Light Adapter for SMD 5050 RGB Flexible LED Strip 10mm Wide LED Tape Light (10pcs)

Product Review