Product Review
Parameter
Model: WS2811 LED pixel
Light source: F8RGB*1
IC Model: WS2811 IC
Quantity: 50 LEDs / strand
LED Shape: Bullet shape
Color: full color, 24-bit
Gray level: 256
Size: Please refer to the picture
Drill hole diameter:12mm
Length: 3.5m/strand
Operating voltage: DC 12V
Power: 0.3W/LED (15W/Strand)
Waterproof: IP68 waterproof
Connection: Red: +12V; White: DATA; Blue: GND
Kindly note
1) It comes without power supply and controller. You'll need a controller such as an Arduino to use them.
2) The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out. 12V 1.25A supply can drive one strand (50 pieces).
3) Please refer to the fifth prodcut image, it shows the input port.
Package:
50pcs WS2811 LED pixels light
To let it work, you may need these
12V 5A Power supply:
http://a.co/9Ntl9xV
SP105E Bluetooth Magic LED Controller:
http://a.co/3FaBmvq
T1000S LED Controller:
http://a.co/91MH14K
Arduino:
http://a.co/5NZCM5S
Raspberry Pi:
http://a.co/1JGpeUB
Black wire LED pixels:
http://a.co/hmxInud
- 【Individually addressable LED 】 This is digitally-addressable WS2811 LED pixel string lights. Per string has 50pcs F8 RGB LED chips and WS2811 smart IC. You can set the color of each LED and their brightness individually! 256-level brightness and 24-bit color display, achieve 16777216 colors full color display.
- 【IP68 waterproof and Durable】 We sealed all the components in a housing with silicone, making its waterproof grade reach IP68. The wires are made of cold-resistant, UV-resistant rubber. Superior materials and design enables it to withstand extreme bad weather such as snowstorm, rainstorm, etc, suitable for long-term outdoor and underwater use.
- 【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance, great for DIY lighting projects.(Please note that JST connectors are not waterproof)
- 【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.
- 【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.
