PARAMETERS:
-Module Type: Non-Isolated buck converter
-Rectifying mode: synchronous rectification
-Input voltage: 9-35V
-Output voltage: 5V
-Output current: 5A (Continuous working) 7A (Max.)
-L...

Buy Now From Amazon

Product Review

PARAMETERS:
-Module Type: Non-Isolated buck converter
-Rectifying mode: synchronous rectification
-Input voltage: 9-35V
-Output voltage: 5V
-Output current: 5A (Continuous working) 7A (Max.)
-Load regulation: ±1%
-Voltage regulation: ±2%
-Output ripples: 50mV (Max.)
-Output ripple: 50mV (Max.)
-Pressure differential: 4V (Min.)
-Working temperature: -20℃ - +85℃ (Industrial grade)(When the temperature is higher than 40 ℃, please reduce power or strengthen heat dissipation)
-Conversion efficiency: 95%
-Dimensions: 59.3×30.5×21.5mm (L×W ×H)
-Three wires: 5.7″/14.5cm

PROTECTIONS:
Reverse polarity connection protection: Yes, MOS anti reverse connection circuit
Short circuit Protection: Yes

WARM TIPS:
â–ºPlease connect the konverter strictly by the wiring instruction. Output reverse polarity connection will damage the electric device.
â–ºPlease ensure the power supply has enough voltage and power for the convertitore.
â–ºIf there are multiplexed output lines, please distribute load, not combine load.
â–ºIf the output current run up to the max output current, please strengthen heat dissipation ( please leave space of current margin, which can prolong life of the module)

  • WIDE TOLERANCE: The DC converter can tolerate the widest input voltage range (DC 9-35V) and provide stable 5V 5A output. Adopts synchronous rectifier technology, the conversion rate can reach 95%.
  • MULTIPLE PROTECTION: The automatic voltage regulator has reverse polarity connection protection and short circuit protection, which can normal work when the working condition resumed, hence safe for use.
  • ALUMINUM SHELL & EPOXIDPOTTING DESIGN: Our DROK conversor uses high quality aluminum alloy shell and advanced expoxidpotting technology, waterproof, shockproof, dustproof, can be applicable to poor working environment.
  • SIMPLE INSTALLATION: The step down adapter is a 4-wire voltage adapter with effortless simple connection (In+: Red wire, In-: Black wire, Out+: Yellow wire, Out-: Black wire).
  • WID APPLICATION: Our buck converter can be widely applied to various field, such as bus, large trucks, cars, solar panel, bus LED display, car radio.

Similar Products

DROK Waterproof DC Buck Converter Voltage Regulator 8-22V to 1-15V 5V 12V 3A Adjustable Output Power Supply Transformer Step-down Volt Module Board for Car Auto Vehicle Motor Regulated SR[Real 18AWG 43x2pcs Wires] 10 Pairs DC Power Pigtail Cable, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK (2.1mm x 5.5 mm, Ultra Thick 18AWG)12 Volt Regulator, DROK Waterproof Synchronous DC-DC Converter Buck 5.5-32V to 1-27V Voltage Regulator 24V to 12V to 5V 5A Adjustable VDC Solid Durable Power Supply BoardSunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino Uno Mega2560Buck Boost Converter Display, DROK Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 3A 35W Power Supply ModuleSMAKN Dc/dc Converter 12v Step Down to 5v/3a Power Supply ModuleCESS 5.5 x 2.1 mm 5A DC Power Jack Socket Threaded Female Mount Connector Adapter - 2.1mm x5.5mm 2 Pins DC Power Jack Female Panel Mounting Connector Socket - 10 PackELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS CompliantDC 24v to 12v Step Down Converter Reducer Regulator 5A 60W Power Supply Adapter for Auto Car Truck Vehicle Boat Solar System etc.(Accept DC15-40V Inputs)ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino