The new and improved Commander 40A MPPT charge controller will take your solar system to the next level. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (...

Buy Now From Amazon

Product Review

The new and improved Commander 40A MPPT charge controller will take your solar system to the next level. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). This controller keeps the batteries from becoming over-charged or discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increases charging efficiency and improves system performance. And with the included MT-50 Tracer Meter you will have full control over your controller. This controller and tracer meter combo will allow your system to run more efficiently then ever!

Specifications
Nominal System Voltage: 12V/24V Auto recognition
Rated Battery Current: 40A
Max. Solar Input Voltage: 150VDC
Maximum Battery Voltage: 32V
Communication: RSJ45
Dimensions: 11.90 x 7.19 x 2.50 inches
Max. Terminal: 25mm2, 4 AWG
Max. Solar Input Power: 520W (12V), 1040W (24V)
Rated Load Current: 20A
Self-consumption: ≤30mA (24V)
Temp. Compensation: -5mV/°C/2V (default)
Weight: 6.39 Lbs
Mounting Oval: 0.30 x 0.18 inches
Max. PV Input Short Current: 50A

  • Advanced maximum power point tracking technology with high tracking efficiency up to 99%. Multiphase synchronous rectification technology ensuring peak conversion efficiency up to 98%.
  • Reverse polarity protection. Electronic protection against overcharging, over-discharging, overload, and short circuit. Die-cast aluminum design allowing for natural heat dissipation.
  • RS-485 port and MT-50 Tracer Meter compatible for extra features. 4-stage battery charging process for a rapid, efficient, and safe battery charging.
  • Sealed, Gel, and Flooded battery option ready. Automatically detects 12V / 24V DC system voltages.
  • This controller’s default battery parameters are set to Sealed Lead Acid. In order to adjust the parameters, Renogy’s MT-50 Meter will be needed.

Similar Products

Renogy Tracer Meter MT-50 for Commander Charge Controller with LCD DisplayRenogy MC4 Assembly ToolRENOGY Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFMRenogy 100 Watts 12 Volts Monocrystalline Solar PanelLink Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, BoatRENOGY 40A ANL Fuse Set w/Fuse (ANL Fuse Holder + 40A ANL Fuse)Renogy 30A MC4 Waterproof in-Line Fuse Holder w/Fuse2 Sets of Renogy Solar Panel Mounting Z Bracket Set of 4 Units RV Boat Off Grid RoofRenogy Solar Panel Mounting Z Bracket (4 Sets)