Product Review

Have a television with a tuner or a digital converter box and want all of those FREE channels? This is the antenna for you!

Receive digital and analog TV broadcast over the air
Frequency Range: VHF: 40-230MHz / UHF: 470-862MHz
Cross-phase, multi-element design
Mostly pre-assembled - only minor assembly required
Superior construction to withstand tough outdoor weather conditions
Can be mounted in attic as well

Specifications:

Frequency Range: VHF: 40-230MHz
UHF: 470-862MHz


Gain:
VHF: 9dB
UHF: 8dB

Mile Range: 80 Miles

Antenna Pole Specifications:
Made of weather resistant iron
18.5" in length from bottom to top
1" Diameter

Pole Installation:
1. Place the mast through the mounting base of the J-pole.
2. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen.
3. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas.
4. Line up the holes of the mounting base of the J-pole with the drilled holes.
5. Drill and then secure the lag bolts into the pilot holes.

Notes:
- Go to antennaweb.org and type in your zip code. This will show you where the broadcast towers near you are located.
- If you are using an older "fat" television, you will most likely need a digital converter box to use this antenna
- ***Attaching the antenna to your television or digital converter box is only part of the process to pull in channels from your antenna. You need to perform an "automatic channel search". This is a feature that can be used by accessing the menu on your television or digital converter box. Please refer to the manual for your television or digital converter box for information on how to perform this action.***