Product Review

Tarmac & Asphalt Joint Repair/Reinstatement 33 ft. 1" Bitumen Roll - Mind The Gap - the leading crack and joint repair system - fast, easy and PERMANENT OUR AMAZON DEAL IS THE LOWEST PRICE PER FOOT OF STICK-DOWN & BURN-ON OVERBANDING !! WITH FAST DELIVERY AND 10 YEAR WARRANTY Tarmac Asphalt and concrete Overbanding Tape, burn-on to seal re-instatement works and repair cracks, torch-on application prevents the ingress of water and extends the life of the repair without the time needed to melt pots of bitumen. High quality bitumin overbanding, 1" wide x 33ft long, open to traffic in 10 minutes INSTRUCTIONS - Sweep the area clean from dust and water, (apply torch beforehand to dry any wet areas) stick tape across the joint removing the separation layer as you go. Lightly torch over the tape to melt it into the jointed line, (kiln dried sand can be sprinkled onto the hot tar joint if additional "non-slip" is needed), The joint will then be waterproof and "welded" together for a long lasting repair.b Melts quickly, faster than other brands, uses less gas and seeps into the join more easily to improve the "weld" and dries harder & stronger in about 10 mins......... This tape is 33ft long - preferable for long trench reinstatements and is trafficable within a few minutes after completion. A polymer modified bituminous strip for use as an instant waterproof overbanding seal for small cracks or reinstatement joints up to 1/4" wide. For use on both road pavements and secondary roads. The application of the tape prevents the ingress of water which causes cracking and severe fretting leading to the eventual breakdown of the asphalt pavement. The skid resistance can be increased by covering the tape with granite dust or kiln dried sand during torch on procedure, providing a surface value similar to that of the existing road surface.