Track Price :: Reviewing Millions of Products!

CNC Carving 4.36Deg 2 Flutes Tapered Angle Ball Tip Radius=0.75mm X 1/4" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated
CNC Carving 4.36Deg 2 Flutes Tapered Angle Ball Tip Radius=0.75mm X 1/4
Disclaimer: As an Amazon Associate I may earn from qualifying purchases


-Type: Tapered angle Ball Nose End Mill / Cone Cutters
-Flutes: 2 Flutes
-Tip Radius: 0.75mm
-Shank Diameter: 1/4"((d1)
-Cutting Length: 1-1/4"(L1)
-Overall Length: 3"(L)
-Single side angle B=4....

Buy Now From Amazon

Product Review


-Type: Tapered angle Ball Nose End Mill / Cone Cutters
-Flutes: 2 Flutes
-Tip Radius: 0.75mm
-Shank Diameter: 1/4"((d1)
-Cutting Length: 1-1/4"(L1)
-Overall Length: 3"(L)
-Single side angle B=4.36°(Approx.)
-Coating: TiAIN
-Material: imported tungsten carbide
-Suitable For:Cutting, end milling, slotting on: aluminum, solid wood,partical board,Hard wood, plywood, etc; -Use top quality imported tungsten steel carbide -Excellent chip removal effect! -High surface finish, excellent work -Long service life

Similar Products

JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN CoatedJERRAY CNC Carving 4.82 Deg Tapered Angle Ball Tip radius=0.5mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated Router BitsCNC Carving 2.12 Deg 2 flutes Tapered Angle Ball Tip radius=2.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with CoatedWhiteside Router Bits 1540 V-Groove 60-Degree 1/4-Inch Cutting Diameter and 7/32-Inch Point Length1/8" 22mm Carbide Ball Nose End Mills CNC Router Bits Double Flute Spiral Set Tool Pack Of 10HQMaster CNC Router Bits, 10 Pack 1/8” Shank Spiral Upcut Router Bit 4 Flute End Mill Set Milling Cutter Tungsten Steel Engraving Carving Woodworking Tool 17mm CEL, 38.5mm OAL for MDF Acrylic PVC WoodT-Nut 1/4"-20 x 5/16", (100 Pack), By Bolt Dropper, Pronged Tee Nut. For Rock Climbing Holds, Wood, Cabinetry, etc.Dewalt DWP611 Porter Cable 450 Router (4 Pack) Replacement Brush # A27343-4pkYonico 31215-SC Yonico 31215-SC CNC Router Bit Up Cut Solid Carbide 1/4" X 1" X 1/4" X 2-1/2" 1/4" Shank,
Copyright © 2021 Track Price - All rights reserved