Product Review
Installation:
1. Make sure the palce you want place the dispenser, sensor system is at the bottom of the dispenser; please keep 50cm free space at least under the sensor system.
2. Slide the fix plate out of the dispenser, use this plate as a template to mark three drill spots.
3. Drill two 5mm holes, and then insert the platic plugs.
4. Fix the plate on the wall qith two screws then slide the dispenser in the plate.
5. Insert 4pcs"AA" batteries into the battery compartment according to the diagram indication.
6. Open the container lid.
7. Fill in liquid.
8. Turn the switch on.
Specification:
Dimension : 11*10*16.5cm / 4.3*3.9*6.5"
Capacity : 600ml
Liquid dosage : 0.8-1ml
Unit weight : 0.425kg / 15oz
Plastic material : ABS, AS
Battery type : 4pcs 1.5V "A"alkaline
Rated volt : DC 6V
Static current : 60uA
Work current : 120mA
Sensor range: 0~8cm
Low battery indication : ≤4.2V
Package:
1* automatic soap dispenser
Troubleshooting:
1. Power: Ensure properly power supply.
2. Sensor: Does the sensor light work? The sensor has a sound? If all is yes, the machine's components are good.
3. Liquid outlet: The product can only put liquid like household dishwashing liquid. It must be a liquid that can flow freely.
Liquid like a gel will easily cause a clogging of the liquid outlet tube so that liquid could not come out.
How to solve?
(1) Pour out the original liquid soap.
(2) Dilute your liquid soap with water, warm water can be used too.
(3) Dredge the liquid outlet pipe with a thimble.