Product Review
Add gigabit PoE to any Switch
• Proven reliability
• Mix 10/100 and gigabit data rate and power on the same cable
• For 8 devices with 60 or 120 watts total power
• Power 802.3af devices
• Power 12v,PoE devices like Hikvision
• 8 data in, 8 Data + PoE out
• This is not a switch - use it to add PoE to any switch or router
• Extend power to 328 ft or 100 meters
• Power is on all the time
Power supply included
• 48 volts DC, 1.25 amps, 60 watts
• 48 volts DC, 2.5 amps, 120 watts
• 110 to 220 volt AC operation
• 90% efficient
• UL, CE and FCC approved
Description
These devices provide power and data in the same Ethernet cable using pins 1,2 and 3,6. All devices receive the same voltage (48v) - total of all devices is 60 (120) watts. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more.
• IP phones like Polycom, Cisco, Yealink
• WiFi Access points
• IP Cameras like Hikvision
• any 802.3af Device
• 12 volt, poe devices (- please see our video on this topic)
• USB, 5v and 12v , non-poe devices - please see our active splitters
Other products from WiFi-Texas
• see also our 10/100 and rackmount versions and switches
• WT-GPOE-4-48v48w with 4 ports
• WS-GPOES-8-7-48v60w with integrated switch
• WS-POE-8-48v60w for 10/100 speed data
• WS-GPOE-16-48v120w for more ports
• WS-POE-12-48v120w for 10/100 speeds and high power
• WS-PoE-Tester to display power used by a device
• WT-AF 5 and 12 volt splitters
• Full details and data sheet at http://wifiqos.com/
