Product Review

Model#: MP00207
MOTOPOWER 6V/12V 4AMP Fully Automatic Smart Battery Charger / Maintainer - Premium Intelligent Charger Series
The MOTOPOWER MP00207 Automatic Battery Charger/Maintainer is perfect for those wanting to charge and maintain their 6v or 12v lead acid battery.

Charging Stages:
*Diagnosis: Checks for proper battery connection (polarity) and for internal battery damage causing a short. Detects the battery voltage (6V or12V). Tests the battery to determine whether it is good or dead.

*Bulk Charge: For 6V battery: Charges with constant current of 2A. For 12V battery: Charges with constant current of 2A or 4A (Determined by user).

*Absorption: Using a constant high current for extended periods of time increases the risk of damaging the battery. To help eliminate the risk, a constant low charging current (output) is given until the battery is fully charged, then the output is turned off.

*Maintenance: The charger monitors the battery voltage. If the battery voltage falls below 12.8V¡À0.2V for a 12V battery or 6.2V ¡À0.2V for 6V battery, the charger will restart output to charge the battery at about 1A current until fully charged then the output is turned off. The maintenance charging cycle is repeated to keep the battery in good condition when it is not in use and enables the charger to be left connected indefinitely.

*Recovery: Use the Recovery Mode for 12V batteries with voltage lower than 8V (the battery should not be completely dead). Recovery Mode charges at a constant 1.5A (rated) low charging current (output) to recover the battery. The recovery process terminates when the voltage reaches 10.5V ¡À 0.25V, and then it switches over to regular charging mode.

NOTE:

NEVER ATTEMPT TO CHARGE A DEAD BATTERY IN CASE OF DANGER!!!