Product Review

Overview: This camera can be used as backup camera,side view camera and front camera,It is with mirror / non-mirror switcher and Image Guide Line (Yes/No) Switcher enable you decide freely the mode of the camera. you can install it at the anyplace of your car you wanted.after you connect it with your monitor,you will be able to see everything that the camera can see.

High-definition and 150 degree wide viewing angle.
Applicable to variety of vehicles: car, truck, RV, etc.
Easy to install.
Its simple and modest design and small size won't draw any attention.
It helps to avoid incidents and accidents abrasion well.
Specification:
Image Sensor: CMOS 7070
TV system: NTSC
Horizontal Resolution: 520 TV lines
View Angle: 150 degree
S/N Ratio: >48dB
Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
Video Output: 1.0Vpp, 75Ohm
White Balance: Auto
Power: DC 12V
Water-proof: IP68
Video Cable Length: 6m
Power Supply Cable Length: 1.5m
Package weight: 178g
Note: this camera is a backup camera with distance scale line as default.
White Switch Wire: Distance scale Line (Yes/No) Switcher
Green Switcher Wire: Mirror/non-Mirror switcher
1.If you need a backup camera with distance scale line,you just install it right now without any operation.
2.If you need a backup camera without distance scale line,please cut the white wire.
3.If you need a front camera with distance scale line,please cut the green wire.
4.If you need a front camera without distance scale line,please cut the both green and white wire.
Note:if you suddenly want to convert backup camera to front view camera or convert front view camera to backup camera,please Switch off electrical power and then connect them again,so it can convert successfully.