Product Review

Product Features:
These 10mm (SMD5050/ 5630) Single Colour LED light strip clasp connectors are a simple, frustration-free solution for LED light strip connection and extension needs.

Installation Instructions:
1.Ensure your section of LED light strip has 2 contacts (+ and -) and all the contacts are clean.
2.Open the white clasp of the connector.
3.If you use waterproof LED strip, you should peel off silicon on the surface around soldering/Cutting line area, then insert the LED light strip into the clasp, with the 2 contacts of the led strip under the 2 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp;
If you use non-waterproof LED strip, just insert the LED light strip into the clasp, with the 2 contacts of the led strip under the 2 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp.
4.Close the clasp.
5.Gently pull the LED light strip to confirm you've made a solid connection.
6.Your connection is successfully made!

Important note:
If the LEDs flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps:
01. Power on your LED strip.
02. Open all the caps of the connector.
03. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact point between the 2 copper contacts on your LED strip and the 2 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 2 prongs in the connector, until you see the LEDs light up.

Package includes:
20x Single Colour SMD5050/ 5630 LED Strip Clasp Connectors(10mm wide)