Product Review

How to use them: 1.If the dent so small and can't see where is it,use a dent board to check where is the dent. 2.Clean the car dent with a clean cloth before repair.
3.Put the glue stick into the glue gun, connect the power source and preheat for 5 minutes.
4.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force.
5.Pull the Glue Gun trigger and apply the glue puller with extruded glue,the glue puller should full of the glue.
6.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres.v 7.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
8.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent.
9.If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen.
10.After finishing the dent,use the alcohol to clean the glue which on the car and the puller sets.

Package List: 10pcs yellow glue sticks
10pcs black glue sticks