Product Review

**EASY APPLICATION:**

1. File your nails including on the surface to get rid of any excess oils.
2. Apply base coat - cure with LED or UV lamp. (UV lamp for 1 min, LED lamp for 30 secs)
3. Apply 1st thin coat of polish - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs)
4. Apply 2nd thin coat of polish - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs)
-- Apply 3rd coat if necessary.
5. Apply top coat - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs)
6. Wipe nails with rubbing alcohol to remove residue.

**GELLEN FAQ**

1. No color changing?

TEST: let the nails touch the ice or put them under the cold flowing tap water,
likewise, soak them in quite hot water. Above actions can clearly see the color changing for your nails.

2. Not dry?

Excluding the factor of the dryer lamp, it is actually dry,
After curing the top coat, wipe the nails with cotton pad soaked with cleanser or alcohol,
the sticky layers will go away, it is dry and shining.

3. Too thick?

To apply thin coats, make sure the brush don't have to much on it before starting the strokes.

4.Peel off easily?

(1)It is vital that you do not get the polish on your skin, make sure you wipe it off very well.
( **If cure it while on your skin, your gel nails will likely chip quick/peel off within a day or two**)
(2)Without using a nail file to dehydrate your nail make the nail surface dry and rough.
(3)Not enough rubbing alcohol to wipe the sticky layer, or it will be cracked.
(4)Different brand base coat used with our brand gel that MAY influence its compatibility.