Multi-functional transistor tester for automatic detection of npn and pnp transistors, fet, diodes, dual diode, thyristor, scr, automatic identification of the transistor pin out. Also can be used as square signal and pwm si...

Buy Now From Amazon

Product Review

Multi-functional transistor tester for automatic detection of npn and pnp transistors, fet, diodes, dual diode, thyristor, scr, automatic identification of the transistor pin out. Also can be used as square signal and pwm signal generator. Automatically test the pins of a component and show on the display. Measure fet Gate threshold voltage and Gate capacitance. For the following 2100ω resistor while measuring its Inductance measuring range from 0.01mH - 20H. Can be used as signal generator and frequency meter: frequency range from 1hz-2mhz and can generate 1%-99% pwm(pulse width modulation) signals. Notice before measuring capacitance, the Capacitor must be discharged, otherwise very likely damage the meter. Specifications type: assembled tester / DIY kit(optional) display: 160*128 LCD power supply: 1 * 9V battery included); DC 6.8-12V current: Approx. 30mA power supply: 1 * 9V battery included) resistance measurement: max. 50Mω resistance resolution: 0.01Ω capacitance measurement: 25pf~100mf capacitance resolution: 1pF DC voltage measurement: up to 50V screen size: 3.7 * 3cm / 1.45 * 1.18in PCB size: 7.8 * 6.2cm / 3.1 * 2.44in product weight: 66G / 2.3Oz package weight: 69-73g / 2.45-2.57Oz what is in the box 1 * transistor tester DIY kit.

  • Main chip is the DIP, easy for electronic enthusiasts to DIY or update the main chip.Use 9V battery(not included), can also use DC power(DC 6.8-12V).Automatic shutdown, shutdown current is only about 20nA.Rotary switch control, a key measurement for convenient use.
  • Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout.Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current.
  • Support 2 resistors measurement, show its positive and negative, on-state voltage.Resistance measurement maximum resolution 0.01Ω, can be measured up to 50MΩ.
  • Measure FET gate threshold voltage and gate capacitance.Automatically test the pins of a component and show on the display.Digital LCD display for easy readings, can display measured data and graphics.
  • For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H.Can be used as signal generator and frequency meter: frequency range from 1Hz-2MHz and can generate 1%-99% PWM(pulse width modulation) signals.

Similar Products

Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequencykuman DSO 138 DIY Oscilloscope Kit Opening Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD pre-solderedOscilloscope Kit, KKmoon DSO138 2.4" TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts SMD Soldered Electronic Learning Set 1MspsKuman 30MHz High Precision Dual-Channel DDS Arbitrary Signal Waveform Generator Counter, 2.4in Screen Display,250MSa/s, 819214bits,Frequency Meter, VCO, Burst, Modulation Function FY6600Aven 17010 Adjustable Circuit Board HolderDIY Calculator Counter Kit with Acrylic Case LCD Display Multi-Purpose Electronic Calculator Counter Electronics ComputingGikfun DIY SMD SMT Welding Practice Soldering Skill Training Board Led EK7026_5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by CorpcoVelleman, Inc – Super Stereo Ear MiniKit MK136 – Entry Level Audio Amplifier Soldering Project