Product Review
The Armor SX5000 WB is a low VOC, water based Silane Siloxane sealer that is approved by the Department of Transportation in several states as a water repellent sealer. It penetrates deep into the surface where it chemically reacts to form a water repellent barrier within the pores, reducing surface water absorption by up to 95%. The Armor SX5000 WB will not change the look or color of the surface, and it will not leave behind a visible surface film. Surfaces sealed with the Armor SX5000 WB become more resistant to damage caused by water absorption such as cracking, spalling, pitting, freeze thaw damage, salt damage, some staining, and efflorescence. The Armor SX5000 WB can be applied to a variety of interior and exterior surfaces including concrete, brick, pavers, aggregate, and natural stone. Whether you are looking to seal a garage floor or driveway, patio or pool deck, the Armor SX5000 makes for a perfect long-term sealing solution. It can easily be applied with a pump sprayer or roller. 5 gallons will cover up to 500 square feet in two coats, or up to 1000 square feet in 1 coat. Coverage varies depending on applicator and surface porosity. Benefits: Contains up to 5X more active ingredients than similar products Will maintain the natural, unsealed look and feel of the substrate Breathable, low VOC Will provide up to 10 years of life before the need for a recoat Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining Will reduce freeze-thaw and salt damage Will reduce dusting caused by surface abrasion Will reduce the movement of moisture through the concrete pores Is approved by the Department of Transportation as a water repellent sealer
- PROFESSIONAL GRADE SILANE SILOXANE SEALER: The Armor SX5000 WB is a professional-grade water-based silane siloxane sealer designed for use on unsealed concrete, brick, paver, bluestone, flagstone, slate, natural stone, and masonry.
- REDUCES WATER ABSROPTION BY UP TO 95%: The Armor SX5000 WB chemically reacts to form a water-repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.
- WON’T CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, the Armor SX5000 WB is designed to protect concrete, brick, pavers, stone, and masonry without changing the look, color, or feel. The substrate will look and feel exactly as it did before it was sealed!
- LONG LASTING PROTECTION: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water-repellent barrier below the surface that can last for up to 7-10 years. By reducing the absorption of water through the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.
- READY TO USE: The Armor SX5000 WB is ready-to-use and can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 square feet per gallon. Foundation Armor cleaners and sprayers are available separately.
- EASY TO MAINTAIN: The Armor SX5000 WB works entirely below the surface so there is no surface film or coating to maintain. When it is time to reseal, simply apply 1-2 coats of the Armor SX5000 WB to a clean, dry, and absorbent surface with a pump sprayer.
- WATER BASED FORMULA: The Armor SX5000 WB is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.
- EASY TO MAINTAIN: This water-based silane siloxane concrete sealer is easy to use and easy to maintain. When it is time to reseal, simply apply a single coat of the concrete sealer to a clean and dry surface with a pump sprayer.
- WATER BASED FORMULA: This silane siloxane concrete sealer is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.
