Product Review
Pattern Name: Numerical Control DC 6-55V to 0-50V 5A Step Down Stabilized Power Supply
Features:
Input voltage: 6-55V
Output voltage: 0V-50.00V
Output current: 0-5.000A
Output power: 0-250W
Weight: 113g
Size: 79 x 43 x 48mm
Cutting size: 71 x 39mm
Output voltage resolution: 0.01V
Output current resolution: 0.001A
Output Voltage accuracy: +/- (0.5% + 1 digit)
Output Current accuracy: +/- (0.5% + 2 digits)
Note: Input voltage must 1.1 times higher than the output voltage.
When large current circumstances, pay attention to heat elimination.
Wiring:
IN+: Input positive
IN-: Input negative
OUT+: Output positive
OUT-: Output negative
Note: Input voltage maximum is 55V, if input is greater than this limit may damage the meter.
Do not use the meter in AC power supply, and wiring should be exactly the same as the wiring diagram, or else it will cause damage.
For Buck Boost Converter, please check ASIN: B07GVK911F, B07GVJ3J8M
Package Including:
1pcs Numerical Control DC 6-55V to 0-50V 5A Step Down Stabilized Power Supply
- UCTRONICS Variable Bench Power Supply DSP5005 - Buck Converter DC 6-55V to 0-50V 5A Precision Digital Adjustable Step Down - Constant Voltage and Current, 10 Preset Settings Switchable: This power supply combines digital control with analog integration. Its output range: Voltage is 0-50.00V, step by 0.01V; Current is 0-5.000A, step by 0.001A
- This step down voltage regulator can store M0-M9 10 groups preset value when power-down. Keep pressing M1 or M2 more than 2s, the corresponding data group will be extracted and displayed on the right of the screen
- The 1.44 in colorful LCD monitor can display the preset voltage, input voltage, output voltage, the preset current, output current, output power at the same time. On the output state remind area, you can monitor that the key is locked or not, output is normal or not, the state of constant voltage and constant current, the current data set prompt and output opens or not
- There are four button-"M1", "M2", "SET" and "ON/OFF", and a coding potentiometer. Can be used for to set the output voltage and output current on the main display interface, set the data on the data setting interface, set the protection value, adjust the brightness of screen, extract Shortcut storage data group M1 or M2, etc.
- Note: When the output of this step down voltage regulator is used for charging a battery or connect a capacitive load, there must be a diode in series with the output-anode, otherwise the regulator will be damaged.
