Sewell Direct SW-29727-25 25-Feet IR (Infrared) Extension Cable

Product Review

This infrared receiver module for remote control system which is PIN diode and preamplifier series are assembled on lead frame, in order t realize the receiving and amplifying interference. The demodulate output signal can directly be decoded by a microrecessor.
It may be used in TV sets, STB, video recorder, DVD, DVR, PVR, satellite receivers, air conditioners etc.
Suit for IR data format: NEC code, R5 code, Grundig code, R-2000 code, RCA code, Zenith code, Sony 12-bit code.

Specification:
Carrier frequency: 37.9KHz (38KHz)
Peak wavelength: 940nm
Operating voltage Vcc: 2.7-5.5VDC
Operating current Icc: 0.9mA (typical) at Vcc=3V, 1.2mA (typical) at Vcc=5V
High output voltage VOH: Vcc-0.25V (min), 5V (max)
Low output voltage VOL: 0.25V (max)
Receiving distance: 20 meter (typical)
Horizontal half angle: +/-45 degree
3 feet shield cable
3.5mm stereo plug: Tip-Vcc 2.7-5.5VDC, Center-IR signal, Lower-Ground (Or, Tip=2.7-5.5VDC, Ring=Data, Sleeve=Gnd)

Works with 38KHz (37.9KHz) carrier frequency and 2.7-5.5V supply voltage, low power consumption with RoHS compliant.
Please check your device with an active 3.5 mini input port labeled 'IR'.
High sensitivity, Long receiving distance 20m (typical) from remote to IR receiver.
No external parts, inner shield, high reliability, TTL & CMOS compatibility.
High immunity against ambient light, power noise and electromagnetic interface.

Track Price :: Reviewing Millions of Products!

XMprimo 3 feet 37.9KHz (38KHz) Infrared Receiver Extender Cable, Suit for TV Sets, Video Recorder, STB, Satellite Receivers, DVR etc, 3.5mm Stereo Plug

Product Review